Index>Products
CF SILICON CARD READER MODULE

Easily make a silicon disk with Compact Flash cards! Both IDE and SATA dual Interface compatible! (MOQ 500 units)

 
  • Specifications
  • Product name

    CF silicon card reader module

    Model number

    SDB35CF

    Interface

    40 pin parallel / 7 pin serial ATA

    serial ATA and parallel ATA cannot be used at the same time.

    Data transmission

    UltraDMA100/SATA1500

    Voltage

    5V

    Supported equipments

    PC/AT compatible machine which carries E-IDE or SATA Interface.

    when connecting SATA, it is strongly recommend to use a host adapter of Intel for best result.

    Contents

    silicon disk builder SDB35CF

    SATA cable 50cm / with a lock ) 

    AC cable for power supply

    instruction manual / guarantee

    Compact flash cards are not included.

    Others

    transfer speed depends on the spec of the SD cards and how the connect ion is completed .

    for high speed transfer, it is recommend to use the CF cards with transfer speed 150 double speed : 55MB/sec parallel , 50MB/sec SATA

    Either 2 or 4 CF cards are required to be installed once for operation . (single numbers of CF cards are not acceptable) .

    It is recommended to install the CF cards with the same capacity and specs for proper functioning.

    Maximum memory capacity: 8GB each card x 4pcs  =32GB

    this machine should be used in the operation range of the connected PC.

    Types of suggested CF cards (confirmed by now)  

    Based on CF A standard Type1

    * Type2 standard products and Microdrive are not supported.

  • Functions and Applications
  • A powerful silicon disk can be constructed easily by daily use CF cards. Operated by striping function with high - speed data transfer ability. 2 CF cards or maximum 4 CF cards can be installed (Maximum memory capacity: 8GB each card x 4pcs =32GB) Memory capacity and the transfer speed are determinable. Comparable to a 3.5” HDD with lower cost and larger capacity. Compatible with both IDE and SATA dual Interface IDE and SATA cannot be used at the same time. Electricity saving ( much lower electricity consumption in comparison with an HDD). Shock-resistance ability.
    _________________________________________________________________

    1) High speed transfer !
    High spee d transfer is achievable with 4 CF cards ( striping function ) .
    * for high speed transfer, it is recommend to use the CF cards with transfer speed 150 double speed : 55MB/sec (parallel), 50MB/sec (SATA)


    2) Determinable storage capacity!
    The total disc capacity can be built up with no problem.


    3) Cost efficient
    Comparable to a 3.5”HDD with much lower price.


    4) Power saving
    Much lower electricity consumption in comparison with an HDD.


    5) Shock-resistance !
    High shock-resistance in comparison with an HDD.

     
    HomeAbout Century JapanProductsNewsContact UsJapanese